Programming the Rife or the Ultimate
Your frequencies are not filing because you are not pressing <PROGRAM> after keying in the frequency. You have to press <PROGRAM> to set a frequency, and
<PROGRAM> again to record the frequency.
If you did not see [Wait….] appear on the screen, then no frequency has been recorded.
Your object is to record over the default frequencies with your own selected frequency set from the manual. positions 0-9 (100,200,300,400 – 999.99) will be erased by your new frequency sets. You are not adding another set of frequencies, you are erasing the machine defaults with your own set.
I will attempt to put a more in depth step program here for you:
(1) Turn on Zapper (ON)
(2) Use UP and Down to preview the recorded frequencies. Notice that next to i is a number. This number represents which menu position you are looking at (0 – 9). For example if you key up arrow three times you will see 400.00i3 This is 400Khz at position 3, (i means IDLE mode.)
(3) Okay, lets say we want to program this position 3 and put in a new frequency “510.00”. Click <PROGRAM> press UP once to make a 5 press right key to move across 1 position, press UP once and now you have 510.00 now press <PROGRAM> again, and your frequency is recorded in menu position 3.
(4) Turn off zapper, unplug power, turn on again and view position 3. 510.00 should be visible (510.00i3)
Use the example above to program any menu position. You do not need to put programs in by sequence, you can program position 9, and then position 1, the sequence does not matter. What is important is that you press <PROGRAM> again when you have keyed in your frequency, and that you select your next frequency in i Idle mode, and then use the <PROGRAM> key to change the frequency in this selected position.
Each machine is tested completely before shipping. We are happy to send you a replacement machine, however we have already had 3 emails identical to yours this week, which were resolved with a better understanding of the <PROGRAM> mode, through these 4 steps above, hopefully you can conquer the menu system, because it is a very easy and quick way to alter frequencies and introduce new frequencies into the machine.